Incompatible RAM modules?

AMD Ryzen 5 5600U/5800U
thj81
Posts: 9
Joined: Thu Apr 13, 2023 2:52 pm

Incompatible RAM modules?

Post by thj81 »

I replaced my old server with AMR5. Running Linux with Proxmox for virtualization. Migration went smooth. At end I wanted to swap existing 2x8GB RAM modules with 2x16GB from Kingston Fury that worked fine in old server:

https://www.amazon.de/-/en/gp/product/B097TM4C4S/

But PC does not boot with them. This is info from existing RAM - 8GB (dmidecode):

Code: Select all

Handle 0x0012, DMI type 17, 92 bytes
Memory Device
        Array Handle: 0x000B
        Error Information Handle: 0x0011
        Total Width: 64 bits
        Data Width: 64 bits
        Size: 8 GB
        Form Factor: SODIMM
        Set: None
        Locator: DIMM 0
        Bank Locator: P0 CHANNEL A
        Type: DDR4
        Type Detail: Synchronous Unbuffered (Unregistered)
        Speed: 3200 MT/s
        Manufacturer: ASint Technology
        Serial Number: 00000893
        Asset Tag: Not Specified
        Part Number:
        Rank: 1
        Configured Memory Speed: 3200 MT/s
        Minimum Voltage: 1.2 V
        Maximum Voltage: 1.2 V
        Configured Voltage: 1.2 V
        Memory Technology: DRAM
        Memory Operating Mode Capability: Volatile memory
        Firmware Version: Unknown
        Module Manufacturer ID: Bank 7, Hex 0xC1
        Module Product ID: Unknown
        Memory Subsystem Controller Manufacturer ID: Unknown
        Memory Subsystem Controller Product ID: Unknown
        Non-Volatile Size: None
        Volatile Size: 8 GB
        Cache Size: None
        Logical Size: None
And what I wish to install:

Code: Select all

Handle 0x0014, DMI type 17, 84 bytes
Memory Device
        Array Handle: 0x000A
        Error Information Handle: 0x0013
        Total Width: 64 bits
        Data Width: 64 bits
        Size: 16 GB
        Form Factor: SODIMM
        Set: None
        Locator: DIMM 0
        Bank Locator: P0 CHANNEL B
        Type: DDR4
        Type Detail: Synchronous Unbuffered (Unregistered)
        Speed: 3200 MT/s
        Manufacturer: Kingston
        Serial Number: AB774EA3
        Asset Tag: Not Specified
        Part Number: KF3200C20S4/16GX
        Rank: 2
        Configured Memory Speed: 3200 MT/s
        Minimum Voltage: 1.2 V
        Maximum Voltage: 1.2 V
        Configured Voltage: 1.2 V
        Memory Technology: DRAM
        Memory Operating Mode Capability: Volatile memory
        Firmware Version: Unknown
        Module Manufacturer ID: Bank 2, Hex 0x98
        Module Product ID: Unknown
        Memory Subsystem Controller Manufacturer ID: Unknown
        Memory Subsystem Controller Product ID: Unknown
        Non-Volatile Size: None
        Volatile Size: 16 GB
        Cache Size: None
        Logical Size: None
Specs values look identical. I am reading there might also be new BIOS. Would update help with detection?

Thank you.
User avatar
barry777
Posts: 1110
Joined: Thu Mar 02, 2023 1:08 am
Has thanked: 35 times
Been thanked: 87 times

Re: Incompatible RAM modules?

Post by barry777 »

What version of Linux are you using? I tested that Kingston Fury 2*16GB can work normally under Windows system.
Attachments
IMG_8405.JPG.JPG
IMG_8405.JPG.JPG (181.17 KiB) Viewed 5424 times
751B3848-249D-4a49-91B2-B706ACBA9C90.png
751B3848-249D-4a49-91B2-B706ACBA9C90.png (64.66 KiB) Viewed 5427 times
741B5E2E-17D5-418f-B038-EB2F7B17574E.png
741B5E2E-17D5-418f-B038-EB2F7B17574E.png (97.15 KiB) Viewed 5427 times
thj81
Posts: 9
Joined: Thu Apr 13, 2023 2:52 pm

Re: Incompatible RAM modules?

Post by thj81 »

I use Debian 11. But computer doesn't even boot to it when I have this modules inserted. Only LED are lit but there is not HDMI output. RAM looks the same, so if it works for your I am puzzled why it doesn't work for me too.

Do I need some special BIOS setting? My BIOS version is:

Code: Select all

        Vendor: American Megatrends Inc.
        Version: V1.07_P4C4M43_EC_0.58_ChbTreey
        Release Date: 07/22/2022
        Address: 0xF0000
        Runtime Size: 64 kB
        ROM Size: 16 MB
        BIOS Revision: 5.19
        Firmware Revision: 17.0
User avatar
barry777
Posts: 1110
Joined: Thu Mar 02, 2023 1:08 am
Has thanked: 35 times
Been thanked: 87 times

Re: Incompatible RAM modules?

Post by barry777 »

Please confirm whether the original 2x8GB RAM of AMR5 can be used normally?
If the original RAM can be used, then you need to verify the compatibility of Kingston (try to use a single 16GB to test whether the two card slots can be turned on normally). In this step, we need to confirm whether the RAM slot is good or not.
Confirm whether the Kingston memory module can be used normally in other devices?
If these verifications pass, you can try to update the bios provided by me. (bios will be sent to you via private message)
thj81
Posts: 9
Joined: Thu Apr 13, 2023 2:52 pm

Re: Incompatible RAM modules?

Post by thj81 »

Hello,

Original 2x 8GB modules are working fine in new PC, which is up and running. Kingston 2x 16GB are also working fine in old server. I have also put the original 2x 8GB to the old server and it works. So only 2x 16GB modules from Kingston are not working on AMR5.

I have received the BIOS in PM. Are there any instructions on how to flash it? I have Linux OS on my AMR5.

Thank you for your support!
User avatar
barry777
Posts: 1110
Joined: Thu Mar 02, 2023 1:08 am
Has thanked: 35 times
Been thanked: 87 times

Re: Incompatible RAM modules?

Post by barry777 »

bios update steps:
If the BIOS is not automatically flashed in, enter the command character: "FS3: Press the Enter key, ls press the Enter key. Press the Tab key to select the NSH file, and then press the Enter key to start execution.
thj81
Posts: 9
Joined: Thu Apr 13, 2023 2:52 pm

Re: Incompatible RAM modules?

Post by thj81 »

Thank you. I will try this later today and get back with status if this solved the RAM detection issue.
thj81
Posts: 9
Joined: Thu Apr 13, 2023 2:52 pm

Re: Incompatible RAM modules?

Post by thj81 »

I have successfully updated BIOS to version 1.10:

Code: Select all

BIOS Information
        Vendor: American Megatrends Inc.
        Version: V1.10_P4C4M43_EC_0_0_58_AMI
        Release Date: 11/02/2022
Sadly with Kinston Fury 2x 16GB RAM stick PC still does not start. I get no video signal and OS doesn't load.

What else can I try? Maybe that tiny hole at front is to do full BIOS reset?
User avatar
Gabe
Senior Moderator
Senior Moderator
Posts: 2006
Joined: Fri Apr 17, 2020 1:19 am
Has thanked: 42 times
Been thanked: 116 times

Re: Incompatible RAM modules?

Post by Gabe »

thj81,

Though I don't know if it will help, it certainly won't hurt anything to try the reset. When you press the button with a paper clip or whatever you use, make sure to press and hold it in for fifteen or twenty seconds to ensure the discharge happens. If you've manually adjusted any BIOS settings, you may have to do so again after the reset.

Before you perform the reset, make sure to disconnect everything from the unit, including the power supply.
W8 Pro • GK1 • AK3 • AM02 • T6 Pro • AMR5 • GK3 Pro • AD03 • AM06 Pro • T8 Pro • S1 • T8 Plus • CK10 • AK2 Pro
I have no connection to ACEMAGIC other than being a customer and long time forum member
thj81
Posts: 9
Joined: Thu Apr 13, 2023 2:52 pm

Re: Incompatible RAM modules?

Post by thj81 »

It did not help. What else could I try? How to debug this?

I do not wish to buy another 2x16GB RAM modules. Price is too high and also I would rather spend money for additional M2 drive.
Post Reply

Return to “AMD Ryzen™5 5600U(AMR5) 5800U”