Fixing V1/E1/E2 (N150) Device Recognition Issues and Unlocking PCIe 3.0 x2 Speed Optimization

Minimalist Design
Post Reply
User avatar
barry777
Posts: 1286
Joined: Thu Mar 02, 2023 1:08 am
Has thanked: 35 times
Been thanked: 106 times

Fixing V1/E1/E2 (N150) Device Recognition Issues and Unlocking PCIe 3.0 x2 Speed Optimization

Post by barry777 »

Top
test.it
Posts: 7
Joined: Wed Mar 05, 2025 9:54 pm
Has thanked: 2 times

Re: Fixing V1/E1/E2 (N150) Device Recognition Issues and Unlocking PCIe 3.0 x2 Speed Optimization

Post by test.it »

I can confirm this for an E1, now with PCIe 3.0 x2.
Attachments
CrystalDisk.PNG
CrystalDisk.PNG (328.33 KiB) Viewed 567 times
Top
tonychemgio
Posts: 4
Joined: Tue Apr 29, 2025 2:45 pm
Has thanked: 1 time

Re: Fixing V1/E1/E2 (N150) Device Recognition Issues and Unlocking PCIe 3.0 x2 Speed Optimization

Post by tonychemgio »

Hi barry777,

Thank you for sharing the BIOS.

I tested it on my Vista V1, but encountered error 20 (FPT Operation Failed) during the process.
Does this indicate a successful flash, or was it unsuccessful?

Appreciate your help!
Attachments
error_20.jpg
error_20.jpg (306.4 KiB) Viewed 54 times
Top
Lemone
Posts: 63
Joined: Thu Feb 13, 2025 6:49 am
Been thanked: 1 time

Re: Fixing V1/E1/E2 (N150) Device Recognition Issues and Unlocking PCIe 3.0 x2 Speed Optimization

Post by Lemone »

tonychemgio wrote: ↑Tue Apr 29, 2025 3:50 pm Hi barry777,

Thank you for sharing the BIOS.

I tested it on my Vista V1, but encountered error 20 (FPT Operation Failed) during the process.
Does this indicate a successful flash, or was it unsuccessful?

Appreciate your help!
Your ME was not refreshed successfully. If the ME firmware is not updated correctly, the system may refuse to load or enter protection mode at startup, or even fail to boot.
Top
Post Reply

Return to “V1”