Stuck in Aptio

[thebeast25]

I replace both my ram and ssd in my pc today and it boots into the patio every time, I know the ram if working but the ssd is most likely what’s forcing the patio menu to appear even after I reset to defaults and save and exit the ssd I got is the WD_Black SN850X with a heat sink please help

[Lemone]

If I understand correctly, you are facing the problem of booting into BIOS. The reasons are likely to be:
1. Unable to identify SSD
2. Whether the SSD heatsink blocks the slot
3. Confirm whether the system is installed

If you have only installed the SSD but not the system, of course you will not be able to enter the system and you will have to reinstall the system with a USB drive
This video is a tutorial video on replacing RAM and SSD on AMR5, please try again:AMR5 Replace RAM and SSD
The following document is a tutorial on how to fix the problem of SSD not being recognized:SSD not recognized
This document is about how to fix booting directly into BIOS：Boot directly into BIOS

If the above operations fail to solve your problem, please provide the order number and send the BIOS homepage to the email address: [email protected]