Page 3 of 4
Re: AK3V (J4125) m.2 SATA SSD support issue
Posted: Fri Nov 06, 2020 9:48 am
by admin
We have reported this problem to the factory and will fix the misunderstanding caused by the model.
Re: AK3V (J4125) m.2 SATA SSD support issue
Posted: Fri Nov 06, 2020 5:26 pm
by Gabe
admin wrote: ↑Fri Nov 06, 2020 9:15 am
Gabe, AK3v are equipped with MSATA hard drives. Please take the time to edit the information again.1.png
Are you sure that the system board you pictured is the current system board in the J4125 based AK3V, because that is not what I have in mine.
There is no confusing an mSATA slot with an m.2 slot. They are quite different. If carlesm was able to install an NVMe drive, he has the same board as i, and NOT a board with an mSATA drive, because an NVMe drive cannot physically be installed in an mSATA slot.
So, both carlesm and I have an AK3V with the board in my picture, which has an m.2 NVMe slot, NOT an mSATA slot.
The picture below is from my J4125 based AK3V system board. It is m.2 NVMe,
NOT mSATA. Note the m.2 mounting screw. Note the key slot placement. It's m.2, NOT mSATA. My AK3V was purchased from Amazon in August 2020, three months ago. It is the J4125 based AK3V, NOT the N3350 based model or the J3455 based model.
This discussion is concerning the newer J4125 based AK3V.
- 100_0064.png (842.8 KiB) Viewed 4898 times
Re: AK3V (J4125) m.2 SATA SSD support issue
Posted: Sat Nov 07, 2020 10:28 pm
by SergS
I can confirm Gabe answer - J4125 based AK3V has M.2 socket with M key.
The mainboard for J4125 based AK3V in my case are marked as GK1_V2.2 (2019.08.30)
Regarding NVME SSD test - i'm still waiting for my NVME SSD - 2242 it not popular SSD size for NVME - I ordered it on Aliexpress and it will take some time to deliver it to my country.
Re: AK3V (J4125) m.2 SATA SSD support issue
Posted: Wed Nov 11, 2020 5:46 pm
by SergS
Got NVME SSD and it works !
Re: AK3V (J4125) m.2 SATA SSD support issue
Posted: Wed Nov 11, 2020 11:11 pm
by Gabe
SergS wrote: ↑Wed Nov 11, 2020 5:46 pm
Got NVME SSD and it works !
Great news!
With as much faster as the 2.5" SATA SSD made my AK3, I can only imagine how much better it would be with an NVMe SSD.
Re: AK3V (J4125) m.2 SATA SSD support issue
Posted: Sat Nov 14, 2020 1:37 am
by SergS
Cusomized NVME SSD cooling =)
- photo5294087448122471108.jpg (179.96 KiB) Viewed 4831 times
It become much better now with SSD temperature.
Re: AK3V (J4125) m.2 SATA SSD support issue
Posted: Sat Nov 14, 2020 1:52 am
by Gabe
Now that's neat!
Re: AK3V (J4125) m.2 SATA SSD support issue
Posted: Fri Aug 13, 2021 8:48 am
by takezo
what about wifi driver, anyone here knows how to configure to run in linux or debian distribution.
currently runnning linux on the box, but without WIFI :-/
Re: AK3V (J4125) m.2 SATA SSD support issue
Posted: Fri Aug 13, 2021 5:22 pm
by Gabe
takezo,
ACEPC cannot provide Linux based drivers. As suggested to your other post, you may be able to find what you need by searching Linux discussion boards.
Re: AK3V (J4125) m.2 SATA SSD support issue
Posted: Sat Oct 16, 2021 3:37 am
by Gabe
SergS wrote: ↑Wed Nov 11, 2020 5:46 pm
Got NVME SSD and it works !
How's it going with the NVMe SSD? Still running well?
Over the last few days I've been thinking about doing the same. Amazon has a decent 256GB drive for under $50. That's not bad considering the odd size. I'm not familiar with the brand (KingSpec), but it has decent reviews.
I was using a 2.5" SATA SSD (250GB), but I ended up having to use that for something else.
